All Rights Reserved

Copyright 2016 -  Monster Seal


The Fastest Teams
Race with Monster Seal


  1. Monster Seal tire sealant is trusted by many race teams including: Motorcycle, ATV, UTV, Quad, Trick-Trophy Truck, and all classes of off road racing, along with Sprint cars and Super Stock cars.

  2. Monster Seal tire sealant out-performs all other tire sealants... which is why more teams are racing with Monster Seal to help keep them out in front all season long. 


  1. Teams spend thousands, and often millions of dollars during the season to be as competitive as possible. Finishing positions are often decided by as little as a hand full of seconds... and there is no time for flats at speeds up to 150 mph.  More teams choose Monster Seal, race after race, season after season because... It Just Works.tm


  1. Monster Seal evenly coats the inside of the tire, and the bead areas to
    help maintain tire air pressure by preventing porosity leakage and small bead area and rim leaks.  See the photo below of a Voss BFG tire evenly coated with Monster Seal.


  1. Independent of getting a flat, maintaining tire air pressure is key to receiving the maximum performance out of your race tires.


  1. Monster Seal is Ethylene Glycol “EG” based and water soluble.  The EG helps cool the tire operating temperature, as proven through the DOT (U.S DEPT. OF TRANSPORTATION) testing completed by Smithers Scientific Labs, Akron Ohio.  Cooling the tire operating temperature help your tires perform better.

  2. Monster Seal will not cause any pitting or corrosion of your wheels. This photo shows wheels after prolonged exposure to Monster Seal for extended periods of time. The Voss photo below shows their wheels are still in new condition, and the inside surface is smooth.

  3. Monster Seal works with AIR or NITROGEN. Many teams use air, while other teams choose Nitrogen to help reduce the increase in tire pressure during the race, and provide additional cooling. In either case, Monster Seal helps cool the tire operating temperature even more, which is critical to your overall tire performance. Monster Seal is ethylene glycol “EG” based (the same component used in anti-free coolant) which helps cool the tire operating temperatures.

  4. Monster Seal contains a special blend sealing solids, including inert fibers, small jagged edged plastic particulate and other sealing solids, which bond together to form a flexible seal in the tread area punctures. 

  5. Monster Seal remains liquid and effective for the life of the tire. It does not dry or ball up, and will not separate or clump up in the tire.  It creates a smooth coating over the entire inner tire surface, and includes an adhesion agent which helps hold the sealant in place.  Monster Seal will not pool or puddle in the bottom of the tire. 

  6. TPMS - Tire Pressure Sensors:  Monster Seal is compatible with tire sensors.  The standard Monster Seal formula used in racing contains the fibers and particulate, and may install through many TPMS valve stems, it may clog some of the sensor valve stems.  If it clogs while installing into a tire with a 5-gallon hand pump and the tire has pressure in it, simply disconnect the sealant hose from the valve stem and allow the pressure to clear the clog.  If the stem clogs, it may be best to install the sealant through the bead area (between the tire and rim).  After the tire is mounted, use the tire machine arm to press down the side of the tire to create a space between the tire and rim, then insert the filling hose through the bead area and inject the sealant.  The sealant will not harm tire sensors, and the sensor should continue to operate as intended.  Contact Bill Martin regarding more information on tire sensors. 

    Bill Martin Bill@MonsterSeal.com

  7. Tire technology is amazing and constantly improving... although a  small puncture, or the smallest rock cuts can cost you valuable time and positions.  Even though teams can quickly change a flat, the downtime often results in being trapped behind the blinding dust of a slower team, and allowing your competition to gain valuable time.

  8. BFGoodrich (BFG), General Tire, Toyo Tire and other tire manufacturers provide great tires... although it’s important to add the extra layer of protection Monster Seal provides, to help you be as competitive as possible.  Remember... it’s not if you will get a flat... it’s when. 

  9. Monster Seal is available in sizes: 8oz, 16oz, 32oz 1-Gal with hand pump, and 5-Gallon pail and hand pump.  Most motorcycle and ATV teams install from the 8oz, 16oz, 32oz and 1-Gal. bottles. The 1-Gal jug includes a small one ounce per stroke hand pump. The retail bottles include a valve core tool and filling hose under the cap. These smaller retail size packaging require the tire be deflated, as the bottle will not overcome any tire pressure.

  10. Teams with larger tires (UTV’s, Buggies, Class 1400 & 1500, Trick Trucks, Trophy Trucks, etc) normally install Monster Seal from the 1-Gal jug or the 5-Gallon pail, by using our 5-gallon hand pump kit.  Our 5-Gal. hand pump allows you to inject the sealant into the tire through the valve stem without deflating the tire, as the pump will overcome up to 50psi tire pressure.  Installation is also quicker with the 5-Gal. hand pump. The 5-gal. hand pump also fits into the top of the 1-gal. after slightly cutting downward on the neck of the gallon opening.

How much tire sealant per tire?

Examples of how much sealant per race tire:
ATV: Front: 10 Rear: 24oz.,  UTV: 32oz.,  Dirt bike: 8oz.
Tires: 35” 35oz.,  37” 50oz.,  39 & 40” 60oz

Calculate how much sealant per off road race tire:
Measure the tire height X full tire width ÷ 10 = ounces per tire
(Height: 39”  X  Width: 13.5”  =  526 ÷ 10  =  52 or 50 ounces)
See below for actual ounces per tire used by race teams


Race Team Examples:

Trick-Trophy Truck:  60 oz per 39” & 40” tire
Trophy Lite Truck:  40 oz per 35” tire
Class 1500:  50 oz per 37” tire
Truck & Buggy:  40oz per 35”, 32 oz per 33”
UTV tire:  30 to 32 ounces per UTV tire
Motor Cross:  8 oz front and 8 oz rear, Kenda
ATV Race Teams:  10 oz front, 24 oz rear
Standard Quad Tires: 16 oz to 24 oz per tire


Each full stroke of the hand pump injects 10 ounces of sealant.
The pump shaft is stamped with marking each 2 oz, so you can also inject less
than 10 ounces by adjusting the thumb screw to limit the ounces injected.

We also have tire charts on this site, and a detailed tire chart is included with every pump kit. We also have a simple formula to use for high speed off road race tires
(tire height X tire width ÷ 10 = ounces per tire.)

Look for the Monster Seal team at the races, and on Contingency Rows.  We also have racing sponsorships and special programs available.  Contact us to learn more and to receive additional Monster Seal. 

Race teams can also contact Bill Martin directly:

Bill@MonsterSeal.com 

To purchase Monster Seal, please contact us to find a dealer near you.  If there is not a dealer or distributor in your area, we can provide you with the products and customer service.  Tel: 1-408-479-9636 or email:  Sales@MonsterSeal.com


Please contact us to find a distributor or retailer near you. 

Email:  Sales@MonsterSeal.com

Toll Free: 1-888-556-8881

California Office:  408-479-9636



 

<script>

  (function(i,s,o,g,r,a,m){i['GoogleAnalyticsObject']=r;i[r]=i[r]||function(){

  (i[r].q=i[r].q||[]).push(arguments)},i[r].l=1*new Date();a=s.createElement(o),

  m=s.getElementsByTagName(o)[0];a.async=1;a.src=g;m.parentNode.insertBefore(a,m)

  })(window,document,'script','//www.google-analytics.com/analytics.js','ga');


  ga('create', 'UA-59166303-1', 'auto');

  ga('send', 'pageview');


</script>

Monster Seal... #1 in Racing
Scroll down to learn how Monster Seal works.

To purchase Monster Seal for race teams
please contact Bill Martin


Bill@MonsterSeal.com
Office: 408-479-9636

The following are graphics of the Monster Seal Logos.  Please copy and paste the logo you would like to receive the artwork for into an email and we will email you the high resolution PDF, JPEG, ai, eps art file.

Please contact us at Bill@MonsterSeal.com
if you have any questions, or need additional information.

MONSTER SEAL TIRE SEALANT 5-GAL. HAND INJECTION PUMP KIT
Includes a valve core tool, tire chart and installation instructions. This pump can be used to install Monster Seal without fully deflating the tire, which saves valuable time. The pump can be used in a 5-Gal. pail or a 1-Gal. jug. The pump injects against up to 50 psi tire pressure. One full pump stroke injects 10 ounces of sealant. A thumb screw on the metal shaft can be adjusted to install less than 10 ounces. There are 2oz, 4oz, 6oz, and 8oz markings stamped into the metal pump shaft.

MONSTER SEAL - Official Tire Sealant of Voss Motorsports for 6 seasons

Contact Us: 1-888-556-8881,  408-479-9636  /  Fax: 408.904.5032     Email:  Sales@MonsterSeal.com  
 HOME     HOW TO USE    HEAVY DUTY USE     PRODUCTS    GRAPHICS    ESPANOL   RACING    CONTACT USContact_Us.htmlmailto:sales@monsterseal.com?subject=Monster%20Seal%20Inquiry%20-%20home%20page.Monster_Seal_Tire_Sealant_Prevents_and_Repairs_Flat_Tires,_tyre_sealant.htmlInstallation.htmlHeavy_Duty.htmlProducts.htmlGraphics.htmlContact_Us.htmlEspanol_-_Spanish.htmlshapeimage_1_link_0shapeimage_1_link_1shapeimage_1_link_2shapeimage_1_link_3shapeimage_1_link_4shapeimage_1_link_5shapeimage_1_link_6shapeimage_1_link_7shapeimage_1_link_8shapeimage_1_link_9

LOOK FOR OUR MONSTER SEAL RACE
SUPPORT VANS ON CONTINGENCY ROW AT THE THE 
2017 BITD, SCORE, MORE, SNORE & WORCS SERIES.

MONSTER SEAL TRICK TRUCK RACERS FINISH 1ST
& 2ND OVERALL AT THE 2017 MINT 400 RACE.

Rob MacCachren Captures 1st &
Jason Voss Takes Home 2nd Place

MONSTER SEAL RACERS CAPTURED FIRST PLACE
OVERALL AT THE PAST THREE MINT 400 RACES


MONSTER SEAL TIRE SEALANT RACERS
ROB MacCACHREN & JASON VOSS
CAPTURE THE BAJA 1000 3-PEAT

MONSTER SEAL RACER - JUSTIN LOFTON CAPTURES BACK TO BACK FIRST PLACE OVERALL VICTORIES AT THE 2015 AND 2016 MINT 400 - THE BIGGEST RACE IN NORTH AMERICA.